"ULTIMATE" Editions are the very best versions of all my tables. Better than "ULTRA", "GOLD" and "VIP"
** Version 1.01 Ultimate **
Optimized for Physics 2.6
A finished reproduction of the popular 1991 table.
Press 'P' to power the table after loading it.
"ULTIMATE" Editions are the very best versions of all my tables. Better than "ULTRA", "GOLD" and "VIP"
---------------------------------------------------
** THE MACHINE: BRIDE OF PINBOT v1.07 **
---------------------------------------------------
FP Recreation Created By:
- Lars Thomas Boye
MOD by:
- SLAMT1LT
** Version 1.07 **
- fixed face not showing up on some systems
- removed ball bounce from flipper lanes
- added flipper catch sound
** Version 1.06 **
- table now starts powered on
- small improvments to graphics and physics.
** Version 1.05 ** (Jet082)
- Billionaire Shot scripted.
- Billionaire Club added, with the ability to save and load the names on the list.
- Multiball Popup timing fixed.
- Fixed bug with losing a ball to Power Charge/Small Wheel kicker if triggered by two balls in the same time frame.
- Added state delay after triggered Metamorphosis (otherwise the Big Wheel could be triggered at the same time).
- Optics lock no longer resets after losing a ball.
- Losing the first ball during multiball no longer immediately ends the round.
- Power Charge score amount reset to 100k at the beginning of each multiball.
- Loop Count is reset to 0 after every round (instead of skipping extra balls).
- Bonus multiplier and Skill Shot Multiplier now displays correctly when double digits.
- Increased pulse state added (first locked ball after Metamorphosis), which grants 250k.
- Spinning the Big Wheel grants a base 1 million points (along with whatever reward from the spin).
- Improved Flipper accuracy.
- Various sounds have been added:
= Added sounds to the Small Wheel kicker when entered after multiball (including when the Bride turns back).
= Added a number of missing voice files, including a Billionaire Club welcome, shuttle launch request, and the bride singing after achieving Metamorphosis.
= Added a missing sound to the Big Wheel
= Added sound effects for applying the bonus multiplier at the end of a round.
= Added missing songs (during the Metamorphosis phase, and after achieving 1 billion points).
** Version 1.04 **
- improved lighting effects
- added new mechanical sounds
- fixed Mediation Error when Billion Points are awarded
- improved physics
** Version 1.03 **
- added a power on/off switch to reset or start the game (press P).
- added better lighting
- improved sound
- added gameroom and cabinets
- removed all the annoying ball rolling sounds!
Version 1.2 (polygame)
- Ball Stuck in the back because of a bracket
Version 1.1 (slamtilt)
- fixed the top gates to stop the ball getting stuck.
Many thanks to all the original contributors to this excellent table. I'm sure you'll all agree that this table needed to be finished.
Table version : 1.02 Physics 2.6
Appreciated! I like the way you're working. 캐나다 비자 온라인 신청
Table version : 1.02 Physics 2.6
I enjoy reading sites that recognize the importance of giving high-quality materials for free. If you want to have a good time, play Friday Night Funkin, a music game that appears to be a little monotonous at first but is highly appealing due to the secret tests. Discover it with me.
Table version : 1.02 Physics 2.6
I just wanna play this game, but Future Pinball keeps crashing.
Table version : 1.02 Physics 2.6
Please Make The Bride Of Pinbot 2.0 Dutch Pinball Version
PS.TheDutchPinball has recreated Bride Of Pinbot 2.0 with new features.
Table version : 1.02 Physics 2.6
merci bien.
Table version : 1.02 Physics 2.6
Hello, i tried all of tables and i'm missing model of Bride and texture under head - on all tables versions, i have everything in Lib folder, nothing is missing and model is not present when i play.
Tried everything, graphics etc. it's only one of 50 tables witch i have problem.
Anyone help?
Thanks in adavance.
Table version : 1.02 Physics 2.6
That's a great design, thanks a lot for your efforts.
Played the table and noticed that even though I reached the goal of 4bil points on my last ball, it didn't give me an extra ball. :(
Table version : 1.02 Physics 2.6
hi there, i have a problem with all version, when i launch the ball i got a slamtilt immedialtly, any of you know how to fix that ? thx
Table version : 1.02 Physics 2.6
Great table, thanks! I came across an error while playing (ULTIMATE 1.02):
Pinball Meditation Error
System(?) error: lline 7993
Overflow: 'number'
Table version : 1.02 Physics 2.6
extra nice :_D
Table version : 1.02 Physics 2.6
Sweet table, Thank You! I'm using physics 2.4 on 1.07 and the pin runs perfect/smooth.
Table version : 1.02 Physics 2.6
Table version : 1.02 Physics 2.6
Nice work... but the "action" is a bit "slow"...
Table version : 1.02 Physics 2.6
Excellent lastest table, I do get the feeling that the main designer of this table and cyclone was really into the rave culture of the 90's lol
Table version : 1.02 Physics 2.6
awesome table perfect, next time they should do jackbot to complete the series :)
Table version : 1.02 Physics 2.6
Great job as usual ! just added a bit more strength to the flippers and to the plunger.
Thanks a lot !
Table version : 1.02 Physics 2.6
My god she's aliveeeeee! Thanks for 2.6 physics update
Table version : 1.01
Great Table.
Harder than hell but addictive and fun.
Thnx.
Table version : 1.01
it looks fantastics, it feels very good, but dont get me wrong, that table not loving me
great work mates, thank you, respect.
p.s. again, 2.6 physics, if you ask me, maybe little bit to fast, but, nevertheless, i can not go to sleep with this one, is very interesting to look where is the ball
Table version : 1.07
On 1.03 the table bugs when your score is above 1 000 000 000...
i hope it is now solved
Table version : 1.07
The GameOver-locked-flipper bug is a race condition with the games internal state machine. You can fix it by replacing the line:
If (State>9) and (State<21) then 'Start new game
with
If (State=10) then 'Start new game
Maybe at some point someone (or I will if I find other stuff to fix) can put up a patch.
Table version : 1.07
Table version : 1.07
nice guys ty
Table version : 1.07
To the guys who are having problems with the Billionaires Club Shot, here's how you do it. First of all, you must complete 3 phases of the face (1. The mouth; 2. The eye sockets; 3. Both balls in the machine face in multiball) If you did these steps, you have the human face as the fourth phase (The Metamophosis). In multiball, if you get the first ball in the human face, you'll increase the Bride's pulse and earn 250,000 points. Now this is where the challenge and luck begins with the second ball: if you manage to get the second ball in the human face like you did to the machine face without losing, it'll activate the big wheel. It'll randomly give you 1,000,000 to 50,000,000 or a Special Award, to a shot for 1,000,000,000! That's where the Bride's heart will flash "1 Billion When Lit" and if you can get the ball in the heart ramp (The center ramp) and it must trigger, you'll earn a billion points, and you'll be a Billionaire's Club Member! But there's a catch: If you lose ONE of the TWO balls while in the Metamorphosis, the Bride will go back to the mouth phase or eye phase, depends on what version you got; and 'stinks to be you', you'll have to start it over! I made the billion point shot once on the 1.7 version, and it was tough! LOL
Table version : 1.07
Is there a way to take out the one way launch gate? I could do it in 1.03, but not in subsequent versions.
Table version : 1.07
Great table but still has a number of bugs, like when it says Game Over and it goes quiet and you press Start, it loads 1 ball, then you shoot ball and find flippers don't work and you can't play after that and must close and reload and start table.
Not sure about the press P for power thing, I just load the table and click Play Table and play like normal.
I also noticed the ramp seems alot harder to shoot ball up than when I played the actual pinball table, which I think might be due to the ramp's slight steeper angle which is hard to notice, but when you do get ball up ramp it is often hard enough that it shoots past the robots head alot, which didn't happen as often when iI played the real table, but it might be related to how the actual table legs are adjusted and floor angle on real table, dunno.
It definately looks like and lights up like the real table though.
Table version : 1.07
Table version : 1.07
Thanks.
Table version : 1.07
Very cool update.
Thank you very much !!
Table version : 1.05
A real classic !!! Very good !!!
Thank you !!!
Table version : 1.05
@pilky still seems to throw a wobbly! i've noticed it's after being awarded credits it goes wrong. i'll try reinstalling.
Thanks pilky
Table version : 1.05
@ninjapinball try deleting the fp ram for this table and see if it still happens if so try reinstalling table
and a tip for all users with a low end pc trying run these tables try lowering the resolution to 800x600 for a frame rate advance in rendering options
Table version : 1.05
Thx super great table
Table version : 1.05
Very nice.
Thanks.
Table version : 1.05
Nice table but I don't like how you have to press "P" to power it up. Doesn't work well with an Arcade or Pinball cabinets.
FIX: Find "constStartOff" in the first part of the script and change to "False". Then it will start with power on.
Table version : 1.05
Great table. The only thing I don't like is the annoyingly loud, clacky "up flipper" noise... Would you consider toning that down a bit?
Table version : 1.05
@pilky: Thank you !!!
Table version : 1.05
ECXELENTE RECREACION!!! 10 STARS
Table version : 1.05
I have no "P" in my cab...
Table version : 1.05
Excellent work, lovable table, great update, thanks
Flash, jc144, Jet082, Larsboy, polygame
SLAMT1LT :)
Table version : 1.05
Superb gameplay
but where's the face?
Table version : 1.05
thx for this update for a great Table!!!
Table version : 1.04
great table but how come i can´t see her face its just grey :P?
Table version : 1.04
Awesome recreation. A couple tweaks to make it perfect.
- Flipper tuning for the ramp shot like malfusion said. I don't recall that shot being that hard to line up.
- Balls drop out of the eyes between balls. I don't recall having to get both eyes on the same ball.
- When extra ball is lit, it doesn't appear to register when it's going down the flipper lanes but did register on the drain lane.
Maybe things like this will inspire me to get more involved in the pinball simulation world as I know you guys put in lots of work to make things look and play the way they do. I am an old pinball junkie and find this all just absolutely amazing.
Table version : 1.04
merci!
Table version : 1.04
great table
thnx
Table version : 1.04
essa mesa é bem louca bom trabalho vc é 10 !
Table version : 1.04
Thanks!
Table version : 1.04
thank u so much for making this! pinball arcade is good, but this is free :-)
Table version : 1.04
Table version : 1.04 works fine for me... great job!
Table version : 1.03
Like the name " THE MACHINE "
Table version : 1.03
must have!
Table version : 1.03
Me gusta. Me gusta. Me gusta. Me gusta. Me gusta. Me gusta. Me gusta. Me gusta...
...I like it!
Table version : 1.03
Table version : 1.03
Table version : 1.03
Great table.Slam if you ever have a free moment can you check the right flipper strengh and accuracy I am feelin its a bit frustrating for ramp shots-I hope its not just me I will have to go back to pinball school.Just an idea when she comes alive just the heart light beats all other lights are off for the first 10 sec or so.So the focuss is on the 1 heart light, then the other lights come on with the heart.thanx for the update luv it.
Table version : 1.03
Thanks for the mod Slam! Very nice work, for fixes/issues see thread @ gopinball
Table version : 1.03
Just amazing.
Table version : 1.03
awesomeness itself !, thx guys, nice teamwork.
Table version : 1.2
Brilliant recreation. You guys did a truly amazing job! Easily the most endlessly replayable FP table in my lot.
Table version : 1.2
I think this table is the perfect recreation! Brilliant!
Table version : 1.2
Perfection!
Table version : 1.2
Let's put it this way - if I had to sell my actual BOP machine, I could live with this recreation. Yeah, it's THAT good.
Table version : 1.2
fantatsic table to play, no problems or hiccups of any kind
Table version : 1.2
I played the version from your youtube channel
THIS IS A REAL FUTURE PINBALL TABLE
Table version : 1.2
Good job !!!
Table version : 1.2
Amazing recreation. Probably the best available so far! Wonderful job, thank you guys.
Table version : 1.2
Working perfect,finally!!!Thank you for recreating this marvellous pinball table.Waiting for more of your good workkkkkk.Cheers mates
So Nice,so Fantastic,I love this Table so much
All we need now is a working billionaire's mode and animation for the turning head and this table will be perfect. Thanks to every single person who worked on this favorite table of my childhood.
Just Played this and got over 104 mil, the thing went crazy nice work guys I love this game!
C'est pour moi la meilleur table de flipper. Elle est très ludique.
Il y a cependant un problème, la bille peut facilement rester bloquée quand elle passe au dessus du visage de la femme. Il y a un clapet qui permet à la bille d'aller sur le visage ou de continuer sa route, et c'est à cet endroit que la bille reste bloqué quand on lance fort la bille.
Nice! You should try creating VP9 tables. I bet you can blow away 95% of the table makers there.
Awesome table. Looks fantastic. The ball did get stuck though.
In my case it starts with: "Pinball Meditation Error" and "Script Error: Line 162".
(so it does not really start...)
Just a few issues with the ball getting stuck though and sometimes the game won't start after playing. Oh and the multi ball seems to disable the flippers if any of the balls go out, not sure if it's meant to do that.
But I still like it, one of the better tables, fun to play.
wow this is awesome thanks